3:1 Epoxy Resin 1.2kg

3:1 Epoxy Resin 1.2kg from THE CRAFT STATION MOLDS is the mid-size pack for artists who've moved past their first few coasters and want enough resin for a proper project batch — jewellery collections, a set of trays, or several deep-cast pieces — without buying the full 4kg. In stock now, free shipping above ₹2599.

What Is 3:1 Epoxy Resin 1.2kg?

The same crystal-clear, self-levelling, low-viscosity 3:1 epoxy resin as our 400gm and 4kg packs, in a 1.2kg size — roughly 900gm resin plus 300gm hardener. It's the pack most small resin makers reach for once they're doing regular batches rather than one-off pieces, since it covers a full project without the storage commitment of the 4kg size.

Compatible Materials

Works with food-grade silicone molds (jewellery, coaster, tray molds), teak and pine wood frames, pressed flowers, mica powder, alcohol inks, pearl powders, glitters, pigment pastes, and metallic foils. Chemical-cure resin — not UV-lamp cured.

How to Use — Step by Step

1. Measure by weight: 3 parts resin to 1 part hardener on a digital scale — never estimate by eye.
2. Mix thoroughly: Stir for 3-4 minutes, scraping the cup sides and bottom fully.
3. Add colour: Mica powder or pigment paste at under 5% of resin weight to start.
4. Pour steadily into your mold, holding the cup low to avoid trapping air.
5. Pop bubbles with a quick heat gun pass.
6. Cure: Touch-dry in 24 hours, full cure in 48-72 hours, maximum hardness at 7 days.
7. Finish: Sand rough edges and buff with resin polish for a glossy finish.

Project Ideas

A 1.2kg pack comfortably covers a jewellery collection (pendants, earrings, keychains from one batch for colour consistency), a matching coaster set, or a mid-size teakwood frame botanical piece. It's the sweet spot for small business production runs and gifting batches.

Resin Specifications

• Mix ratio: 3:1 by weight
• Pack size: 1.2kg — approx. 900gm resin + 300gm hardener
• Pot life: ~25-30 minutes at 25°C
• Full cure: 48-72 hours; max hardness at 7 days
• Finish: Crystal clear, high-gloss, UV-resistant

Why Buy From TCS Molds?

Jammu's first dedicated resin art store, trusted by 5,000+ artists across India.

• ✓ Same-day delivery in Jammu
• ✓ WhatsApp support
• ✓ Free shipping above ₹2599
• ✓ 7-day return policy
• ✓ Bulk pricing for studios and businesses

Frequently Asked Questions

Q: How many coasters does 1.2kg make?
A: Around 30-35 standard 10cm coasters at typical pour depth.

Q: Is this enough for a jewellery business batch?
A: Yes — most small jewellery makers get 60-100+ pendant/earring pieces from one 1.2kg batch depending on mold size.

Q: Should I choose this or the 400gm pack?
A: If you're making more than 8-10 pieces per session or running a small business, 1.2kg is more cost-effective per gram and avoids running short mid-project.

Complete Your Resin Kit

• Silicone Molds
• Colour Pigments & Mica Powder
• Resin Tools