Small Crystal Mold – Silicone Mold for Resin Crystal Jewellery, Quartz Point Pendants & Mini Crystal Figurines India

Small Crystal Mold – Compact Quartz Point Form for Resin Jewellery & Mini Crystal Figurines

The Small Crystal Mold from THE CRAFT STATION MOLDS is your go-to silicone mold for crafting resin crystal jewellery, quartz point pendants, dainty earrings, keychains, and miniature crystal figurines. Designed around the iconic single-point crystal form — narrow at the tip, widening into a natural faceted base — this mold captures every facet edge with crisp detail so your finished pieces look like polished gemstones straight from the mold.

Made from food-grade platinum silicone that is BPA-free and non-toxic, the Small Crystal Mold flexes easily for clean demolding without distorting your cured resin piece. Its compact cavity size makes it ideal for UV resin projects where you want a fast 2–5 minute cure under a 36W+ UV lamp, and the shallow depth means no worries about exotherm cracking. Rated for 100+ uses, this mold will serve your jewellery business or hobby studio for years.

This mold pairs perfectly with the Big Crystal Mold to create mixed-size crystal sets — arrange a large amethyst point alongside three small rose quartz points for a stunning tabletop display or a layered jewellery collection. Combine crystals with resin pigments and dried botanicals for one-of-a-kind wearable art.

Mold Specifications & Material Compatibility

Step-by-Step: UV Resin Crystal Pendant

UV resin is the fastest path to a finished crystal pendant with this mold. Because the cavity is small and shallow, a single-component UV resin cures fully under a 36W+ UV lamp in just 2–5 minutes per layer — no mixing, no waiting 24–48 hours like epoxy resin.

1. Prepare Your Workspace

Place the Small Crystal Mold on a flat silicone mat. Gather your UV resin, resin pigment or mica powder, UV lamp, tweezers, toothpick, and IPA (isopropyl alcohol) wipes. Wear nitrile gloves and work in a ventilated area.

2. Colour Your Resin

Pour a small amount of UV resin into a mixing cup. Add 1–3 drops of resin pigment — try amethyst purple, rose quartz pink, or clear with a shimmer mica for a natural quartz effect. Stir gently for 60 seconds, scraping the sides to prevent colour streaks.

3. First Pour — Crystal Tip Layer

Pour or pipette a thin layer of coloured resin into the crystal tip, filling it about one-third. Use a toothpick to coax resin into the narrow point without trapping air bubbles. Cure under your UV lamp for 2 minutes.

4. Optional Inclusions Layer

For an embedded inclusion — a dried flower petal, glitter flake, or gold foil — place it on the cured first layer using tweezers. Pour a thin encapsulation layer over it and cure for 2 minutes. This partial-gel technique locks your inclusion in place at the centre of the crystal for maximum visual impact.

5. Final Fill & Full Cure

Top up the mold to the brim with coloured UV resin. Cure for 3–5 minutes. After curing, wipe the slightly tacky surface (oxygen inhibition layer) with an IPA-soaked cloth to eliminate stickiness without sanding.

6. Demold & Finish

Gently flex the silicone mold from the sides and peel away from the base. Your crystal pendant pops out cleanly via easy release. Sand the flat base lightly with 400-grit wet sandpaper if needed. Attach a bail and chain for a finished pendant, or add a jump ring and earring hook for dangle earrings. Apply a UV resin doming top coat for extra depth, gloss, and mirror finish.

Epoxy Resin Crystal Figurines — Two-Layer Pour Technique

For crystal figurines, fridge magnets, or keychains with deep embedded inclusions, use epoxy resin at a 3:1 ratio (3 parts Part A resin to 1 part Part B hardener by volume). The compact cavity cures without significant exotherm, but a two-layer pour gives you the cleanest result with inclusions:

Layer 1: Fill halfway. Allow to cure 12–18 hours until firm but slightly tacky on top. Place your inclusion — dried botanical, photo, foil leaf — using tweezers. Layer 2: Pour remaining resin to the brim. Allow full cure 24–48 hours at room temperature. Demold gently by flexing the silicone. Sand the base if needed. Attach a bail, keychain loop, or magnet to finish.

Crystal Colour Palettes & Gemstone Ideas

Amethyst Purple

Deep purple plus violet pigment with a hint of silver mica. Keep it slightly translucent so light passes through the crystal point like genuine amethyst. Make multiple small crystals in varying purple shades for a cluster arrangement.

Rose Quartz Pink

Soft blush pink with a pearl shimmer mica. Keep the colour delicate and translucent — real rose quartz is never opaque. Pairs beautifully with the Big Crystal Mold in coordinated pink tones for a luxury gifting set.

Clear Quartz with Botanicals

Clear UV resin with zero pigment. Embed a tiny dried gypsophila blossom or gold foil flake at the centre for a botanical crystal pendant. The transparency makes the inclusion the hero.

Citrine Amber Keychain

Warm amber-yellow with a gold shimmer mica. Associated with abundance and positivity — a popular crystal charm. Drill a small hole post-demold or embed a keychain loop before the final layer of UV resin cures.

Smoky Quartz Earrings

Translucent warm grey with a slight brown undertone. Pour two cavities simultaneously from the same batch for matching earring pairs with identical colour depth and translucency.

Project Ideas & Pricing for Handmade Sellers

The Small Crystal Mold is a bestseller for resin jewellery businesses across India. Here are popular product ideas with suggested retail price ranges to help you plan your collection:

Crystal pendant (UV resin, single point): ₹150–₹350 retail. Fast UV production, high perceived value. Offer in amethyst, rose quartz, and clear quartz for a three-piece starter collection.

Crystal stud earrings (pair): ₹200–₹500 retail. Pour two matching cavities simultaneously for identical pairs. Use hypoallergenic stainless steel earring posts for sensitive ears.

Crystal dangle earrings with botanicals (pair): ₹300–₹700 retail. Embed dried flower petals using the partial-gel technique for botanical crystal earrings — among the highest-converting resin jewellery on Instagram and Etsy India.

Crystal keychain: ₹150–₹400 retail. UV resin production in under 10 minutes per piece. Bundle with a luxury gift box and a kraft paper tag for ₹500–₹900 retail at festive markets.

Fridge magnet set (3 crystals, mixed colours): ₹300–₹700 retail. Attach strong neodymium magnets to the flat base with E6000 adhesive. Gift-wrap in kraft paper and twine for Diwali gifting sets.

Mixed crystal display set (Small + Big Crystal Mold): ₹800–₹2,000 retail for a 5-piece set. A large amethyst point surrounded by four small rose quartz crystals makes a ready-to-gift luxury home décor piece.

Works With All Your Resin Art Materials

The Small Crystal Mold is compatible with the full range of materials stocked at THE CRAFT STATION MOLDS:

→ Epoxy Resin (3:1 ratio) — crystal-clear depth for figurines and embedded-inclusion pieces. Cure time 24–48 hours at room temperature. Mix thoroughly for 3 minutes before pouring.

→ UV Resin — single-component, no mixing needed. Cures 2–5 minutes under a 36W+ UV lamp. Max recommended layer depth 3–4mm. Wipe oxygen inhibition layer with IPA after cure for a tack-free surface.

→ Resin Pigments & Mica Powders — for gemstone colour effects. Use transparent pigments for a glassy crystal look; pearlescent micas for inner shimmer and depth.

→ Soy Wax (50–55°C pour temperature) — pour miniature crystal candles. Cool at room temperature; never refrigerate. Add a small wick for a decorative crystal birthday candle.

→ Cold-Process Soap — no mold release spray needed on platinum silicone. Demold after 24–48 hours; cure soap bars for 4–6 weeks before use.

Why Artists Trust THE CRAFT STATION MOLDS

We are Jammu's first dedicated resin art supply store, trusted by 5,000+ artists across India. Our silicone molds are made from food-grade platinum silicone — the same grade used in professional confectionery and laboratory applications — delivering sharp detail, easy release, and a non-toxic, BPA-free, reusable mold that lasts 100+ uses.

The Small Crystal Mold ships pan India with free shipping above ₹2,599. Order before 12 PM for same-day dispatch from Jammu (same-day delivery within Jammu city). We offer a 7-day return policy on manufacturing defects. For bulk orders — workshops, craft schools, B2B resellers — contact us on WhatsApp for exclusive bulk pricing.

We encourage you to film your first pour as an unboxing video — our molds are designed to impress on camera and in your hands.

Frequently Asked Questions

Is UV resin or epoxy resin better for the Small Crystal Mold?

UV resin is recommended for jewellery use (earrings, pendants, keychains) because it cures in 2–5 minutes and suits small, shallow cavities perfectly. Epoxy resin (3:1 ratio, 24–48 hour cure) is better when you need a thicker figurine or want to embed deeper inclusions like botanicals or photos.

How do I avoid air bubbles in the crystal tip?

The narrow crystal tip is the most bubble-prone area. After pouring, use a toothpick to gently push resin into the tip and burst visible bubbles. For UV resin, a brief pass with a heat gun on low (held 20 cm away) before curing brings bubbles to the surface. For epoxy, cover the mold and let it rest for 10 minutes so bubbles self-release.

Can I make a matching earring pair with this mold?

Yes — if your mold has multiple crystal cavities, fill them simultaneously from the same mixed resin batch for identical colour and translucency. For a single-cavity mold, mix a slightly larger batch, fill the first form, immediately pour the second into a compatible mold, and cure both together under the UV lamp for a matching pair.

How do I attach a bail to make a pendant?

After demolding, use E6000 adhesive or UV resin to attach a glue-on bail to the flat base of the crystal point. Alternatively, use a 1mm resin drill bit to drill a small hole at the top of the crystal and thread a jump ring through it for a more secure pendant bail.

Does this mold work for soy wax candles?

Yes — pour soy wax at 50–55°C for clean cavity filling. Cool at room temperature (never refrigerate — rapid cooling causes sinkhole cracks in small forms). Top up any sinkhole with a second small pour of matching wax. Paraffin wax can be poured at 60–65°C. Add a small birthday candle wick before the wax sets for a decorative crystal birthday candle.

How do I clean the mold between pours?

For fully cured resin residue: flex the mold to dislodge any cured drips. Wipe with an IPA-soaked cloth for uncured or partially cured resin — do this immediately after any overflow, as cured resin inside the cavity is very difficult to remove. Avoid acetone or harsh solvents — they degrade silicone and shorten mold life. Store the mold flat in a dust-free drawer away from direct sunlight to preserve cavity detail.

📦 In stock | Free shipping above ₹2,599 | Pan India delivery | Same-day dispatch in Jammu | 7-day return policy

💬 Questions about crystal jewellery techniques or bulk pricing? Chat with us on WhatsApp — we reply within minutes.