9 Inch Flower Clock Mold – Silicone Mold for Resin Flower Wall Clock, Epoxy Resin Clock & Handmade Home Décor India

What Is the 9 Inch Flower Clock Mold?

The 9 Inch Flower Clock Mold from THE CRAFT STATION MOLDS is a food-grade platinum silicone mold in an elegant flower shape — nine inches in diameter — designed specifically for casting resin wall clocks. The mold creates the clock face and housing in one pour: the flower silhouette with petal edges gives the finished clock a sculptural, organic quality that looks far more premium than a plain round clock face, and the silicone is flexible enough to release even heavily pigmented, glitter-filled, or geode-poured resin cleanly after curing. After demolding, a standard AA-battery clock mechanism (not included) is inserted through the centre hole of the cured resin clock face, and the hands are attached to complete the piece. The result is a functional, decorative wall clock that doubles as resin art — a category that sells extremely well at craft markets, on Instagram, and as personalised gifting. BPA-free, non-toxic, and rated for 100+ uses. Trusted by 5,000+ artists across India and available with same-day delivery in Jammu and free shipping above ₹2,599 pan India.

Compatible Materials

This 9 Inch Flower Clock Mold is compatible with all major resin and casting mediums. Epoxy resin (3:1 ratio, Part A to Part B by volume) is the preferred medium for wall clocks because of its clarity, deep pour capacity, and hard cure that holds a clock mechanism securely. Cure time is 24–48 hours; for a 9-inch clock face (typically 15–20mm depth), pour in two layers to avoid exotherm — a thin base layer first, allow to gel, then pour the full fill. UV resin is suitable for a thin surface clock face but cures only to 3–4mm per layer under a 36W+ UV lamp. Plaster of Paris and concrete can also be cast in this mold for a raw, tactile clock face aesthetic — both release cleanly from platinum silicone without mold release spray. Soy wax (pour at 50–55°C) can create a flower-shaped decorative wax panel using this mold, though wax is not structural enough for a functional clock face.

How to Use — Resin Flower Clock (Step-by-Step)

Follow these six steps to create a finished resin flower wall clock using this mold and a standard clock mechanism.

1. Prepare the mold: Clean and dry the silicone mold completely. Place it on a flat, level surface — a piece of foam or a cardboard shim under one side helps level an uneven table. Lightly spray with mold release spray for easier demolding on your first few uses.
2. Mix epoxy resin: Measure Part A and Part B in a 3:1 ratio by volume. Stir slowly for 3–4 minutes, scraping the sides and base of the mixing cup. For a 9-inch clock face, prepare approximately 250–350ml of mixed resin depending on desired depth.
3. Tint and design: Divide mixed resin into cups and add mica powder pigments for colour. Popular clock palettes include white marble with gold veins, galaxy deep blue with silver glitter, teal + copper geode, and translucent amber. Pour a base layer first (approx. 8–10mm), allow to reach partial gel (20–40 minutes), then pour design layers — geode veins, agate colour bands, or a solid colour flood coat.
4. Add inclusions: While the resin is still wet, sprinkle glitter, dried flowers, or gold leaf flakes for texture and depth. Use a heat gun briefly to pop surface bubbles and encourage the resin to flow and blend.
5. Cure and demold: Cover loosely with a box or dome to keep dust off. Cure undisturbed for 24–48 hours. Demold by gently peeling back the silicone mold walls — the flexible silicone releases even deeply pigmented resin cleanly. Sand edges with 400-grit sandpaper if needed, and optionally apply a UV resin gloss top coat for a glass-like finish.
6. Install the clock mechanism: Drill or widen the centre hole of the cured resin clock face to the diameter required by your clock mechanism (typically 8–10mm). Insert the clock mechanism shaft from the back, attach the hands to the front, and add a AA battery. Hang with a D-ring or picture hook mounted on the back of the mechanism.

Project Ideas & Selling Price Guide

Resin clocks are one of the highest-value resin art products and consistently sell out at craft fairs and online. Here are five project and product ideas with estimated selling prices.

• Geode Flower Wall Clock: White marble base with teal, blue, and gold geode veining — a 9-inch flower clock face sells for ₹1,200–3,500 depending on complexity and finish.
• Galaxy Flower Clock: Deep navy and purple resin with silver glitter and iridescent shimmer creates a galaxy clock face that retails for ₹1,500–4,000.
• Dried Flower Botanical Clock: Embed pressed dried flowers in clear or tinted resin for an elegant botanical clock face that sells for ₹1,000–2,500.
• Premium Gifting Clock — Diwali & Wedding: A personalised agate or marble resin clock with a gift box and clock mechanism included is a premium Diwali or wedding gift retailing at ₹1,500–5,000.
• Resin Clock Workshop: Host a 3-hour clock-making workshop where participants create their own flower clock. Workshop fees typically range from ₹800–1,500 per person, with materials included.

Product Specifications

Why Buy from THE CRAFT STATION MOLDS?

THE CRAFT STATION MOLDS is Jammu's first dedicated resin art supply store, trusted by 5,000+ artists across India. We offer free shipping above ₹2,599, same-day delivery in Jammu, and bulk pricing for resin art studios and workshop organisers. Every order is backed by our 7-day return policy and WhatsApp support — reach us at +91 97971 37137. Our silicone molds are food-grade, non-toxic, and designed for long-term use. We have only 3 units of this clock mold available — WhatsApp us before ordering to confirm current stock. Watch our unboxing videos on social pages to see the mold in use before buying.

Shipping & Delivery

In stock and ready to ship. Same-day dispatch for orders placed before 3 PM from Jammu. Free shipping on orders above ₹2,599. Pan India delivery in 3–7 business days. WhatsApp us at +91 97971 37137 for bulk orders or urgent delivery before a workshop.

Frequently Asked Questions

Is the clock mechanism included with this mold?

No — only the silicone mold is included. A standard AA-battery clock mechanism with hands is required to complete the clock and is widely available from local hardware stores, online marketplaces, or craft supply shops. The mold creates the clock face/housing; the mechanism provides the timekeeping function.

What size clock mechanism do I need for a 9-inch mold?

For a 9-inch resin clock face, you need a standard clock mechanism with a shaft length long enough to pass through the thickness of your resin pour (typically 15–25mm shaft length). Look for a "high torque" mechanism if your clock hands are longer or heavier than standard. The shaft diameter is approximately 6–8mm — drill or widen the centre hole to match.

How do I prevent the resin clock face from warping or bowing?

Pour in two layers rather than one deep pour for a 9-inch mold. Deep single pours generate significant heat during curing (exotherm) which can cause warping. Pour a first layer of approximately 8–10mm, allow it to reach partial gel (20–40 minutes), then add the second layer. This staged approach also allows you to embed dried flowers or inclusions between layers at precise depths.

Can I use this mold for decorative panels (not clocks)?

Yes — the 9-inch flower mold creates a beautiful decorative panel without the clock mechanism. Use it to cast a standalone flower-shaped resin art piece for wall display or tabletop décor. Simply pour, cure, demold, and hang with a D-ring or picture hook directly attached to the back of the cured resin piece.

What is the best colour palette for a resin clock?

White marble with gold veins is the most consistently popular palette for resin clocks — it suits modern interiors and photographs beautifully. Other strong-selling palettes include teal + copper geode, galaxy navy + silver, translucent amber + gold, and black + white + gold agate. Avoid very dark backgrounds if you plan to use black clock hands — white or gold hands show up better on dark clock faces.

Can I make soy wax candles in this flower clock mold?

The mold is compatible with soy wax poured at 50–55°C, but the result will be a flower-shaped wax disc or decorative panel — not suitable for a candle with a wick (the shape is too shallow and wide). This mold is best used for wax melt tiles, decorative wax panels, or wax art rather than candles. For functional candles, a deeper cylindrical mold is more appropriate.

Is the platinum silicone food-grade?

Yes — this mold is made from food-grade platinum silicone. However, once used with epoxy resin or other craft chemicals, the mold should not be repurposed for food use. Keep resin molds strictly for craft use.

Complete the Kit

Pair the 9 Inch Flower Clock Mold with crystal-clear epoxy resin, mica powder pigments for colour and marbling, pressed dried flowers for botanical clock faces, and mold release spray and a heat gun from our tools range. For help with resin pour volumes, clock mechanism sourcing, or clock-making workshops, WhatsApp our team at +91 97971 37137 — we are online seven days a week.